Lycopro Baby Wax Heater

• Remove the lid and fill the metal insert(s) with the hot or strip wax you choose. DO NOT put wax directly into the heating chamber. Only in the removable inserts.
• Plug into a power point, and turn the regulator dial clockwise to switch the heater on.
• First, turn the dial to 5 for at least 30 minutes to speed up hot wax heating, depending on how much wax is in the insert. When relatively melted, reduce heat and allow the wax to cool to a working temperature. For strip wax, heat on 5 for about 15 minutes, then reduce heat slightly to maintain working temperature.
• NOTE 1: As all wax melting points vary, it is best to determine the optimal temperature setting for the wax you are using. For hot wax, the working temperature is around 3 – 4 on the dial. For strip wax, the operating temperature is around five on the dial. The actual wax temperature is a few degrees lower due to using an insert.
• NOTE 2: LYCON Strip Wax jars can be melted in a microwave and then poured into a removable insert for use, which can be reheated and added to as required.
• To increase temperature, move the regulator dial clockwise.
• To reduce temperature, move the regulator dial anti-clockwise.
• When the wax and insert are hot, carefully remove the insert from the heater with a protective cloth.

• DO NOT immerse the heater in water.
• DO NOT use the heater near the water.
• DO NOT allow water to splash onto the heater.
• DO NOT clean the heater with water.
• DO NOT overfill the heater. Fill up to around 2cm from the top of the insert.
• DO NOT move the heater when it has hot melted wax inside.

Ships within Australia Only.